How To Fix A Small Dent In A Car Door?

When you see a new dent on your vehicle, you are amazed of how it got there. Honestly, there are many reasons for that. Different impacts produce different kinds of dents, and sometimes accidents happen. And if you’ve been into a bad hail storm, you can get a small surprise in a car surface. So, how to fix a small dent in a car door?

No doubts, any, even the smallest dents in your car can be disturbing. The vehicle doesn’t look good and it is really frustrating for you as for an owner. Even if you don’t know how it happened, you should know how to fix everything. But first, you should find out what type of a dent your car has. This information will help you to find the best repair option and you can answer the question How to fix a small dent in a car door easily!

Type of Dents Your Car May Have

  • Round Dents

These types of dents are common and are caused by different round objects. It can be a ball or a hail, hitting your car while your vehicle is stationary. These dents are usually wide and round but won’t damage the paint. You can try to fix the car door on your own of spend a couple of hours and take your car to the PDR station for fast fixing. Paintless dent repair is the best option to put your vehicle back into its perfect condition.

  • Creased Dents

Crease dents are also can be fixed with paintless dent repair. You can damage your car when something (a vehicle, tree branch, bicycle, trailer) brushes up and draws against the side of your car. These dents are long and deep to damage the metal in your vehicle. How to fix a dent in a car door? Fixing such a large dent can be challenging and needs professional help.

  • Sharp Dents

Sharp dents are caused by a hard usually small item. You can get them in parking lots by another vehicle’s doors, shopping carts, or subjects. Sharp dents sometimes leave a high spot with a deep scratch.

  • Extreme Dents

Extreme dents usually happen when your vehicle hits with something substantial at a quicker speed, or by a person just leaning on it. You can fix them with the help of special tools and experts. Not all issues can be repaired with paintless dent repair methods. If the body of your car has been damaged or you’ve got large creases and dents in multiple areas on your vehicle, you might require a bit more work done to completely get your car back to where you want it to be.

How to fix A SMALL DENT in a car door?

1 Step

Wet the surface

You should prepare the door surface for repairing procedure. How? You can make it wet and slippery with the help of a mix of soap and water. Cover the dent surface, ensuring that it’s slippery. Now, place a plunger in the center of the dent. Press it against the door panel gently to create suction.

2 Step

Pop the dent

The next thing you need to do is pop the dent out by pulling the plunger back gently. If you can’t do the properly the first time, try pulling harder. To pop the dent out of the panel, you need to pull harder. If the dent is still there, release the suction by sliding the plunger down. Once you’ve removed the plunger, rinse the soap off the door panel.

3 Step

Detach the door

Just open the door as wide as it can go. With the help of a special tool start removing all the screws from the door panel. Remember that there are screws below and above the door panels. You should also remove the screws from the inside pockets. You may take a flat screwdriver, then pop open the small circle or square covers.

Now, you need to pop the internal panel away from the door. You can do this by pulling it away along the edges. You also need to disconnect the door’s wiring from the back side of the interior panel. The wiring should be located behind the panel. Once you’ve disconnected it, you can lift the panel up, then pull it off the door.

4 Step

Peel the plastic sheet of the metal door frame

Keep in mind that strong adhesive keeps the plastic sheet stuck on the metal door frame. You need to peel it off. Remember to lay the door panel flat on a clean area, ensuring that the adhesive does not touch anything. In this way, you will still be able to reuse the plastic sheet.

5 Step

Push the dent out

Place your hand on the back side of the dent, then push it out carefully. If that does not do the trick, you can apply more pressure or even use a rubber hammer. Gently tap the dent out, putting the panel back into place. Once you’ve taken care of the dent, you can put the plastic sheet and the interior door panel in their original positions.

Of course, if the dent is more serious than you can handle, you have to drive your vehicle to a professional body repair shop. Knowing your budget and what type of dents your car has, you can save your time and get your car back soon. Taking care of little dents and dings on a vehicle is a simple matter. This type of damage may not require much work at all, even on a car’s aluminum and plastic parts. Nevertheless, people often ask How to fix a dent in a car door? Be ready for the situations that you may want to tackle. No matter what the reason for the dent is, professional repair shop can help you with your dent repair and dent removal needs. Find the best service near you available to repair your vehicle.

Share this: